Wiring - Siemens MASS 2100 Operating Instructions Manual

5.3.3

Wiring

1. Connect transmitter and sensor using the multiple plug connector on the blue cable supplied
with the sensor.
Figure 5-4
2. Connect grounding terminal
Figure 5-5
Note
Cable screen
The sensor cable screen is mechanically connected to the grounding terminal (PE), when
the multiple plug is correctly tightened.
Wiring tool
Use the wiring tool for connecting the cables in the compact housing transmitter.
The wiring tool is located in the application terminal compartment.
Figure 5-6
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Sensor and transmitter connection
①
to protective earth (PE).
Grounding terminal
Wiring tool location
Connecting
5.3 Wiring information
83