Siemens MASS 2100 Operating Instructions Manual page 450

Default settings
B.9 Maintenance and diagnostics
HMI menu ID Parameter
3.7.5.5.1 Register 1
3.7.5.5.2 Register 2
3.7.5.5.3 Register 3
-- --
-- --
-- --
3.7.5.5.90 Register 90
Table B-38 Simulation
HMI menu ID Parameter
3.8.1.1 Simulation inputs and outputs
3.8.1.1 Channel 1 – output with HART
3.8.1.1.1 Simulation
3.7.1.1.2 Simulation value
3.8.1.2 Channel 2 - output
3.8.1.2.1 Operation mode
3.8.1.2.2 Simulation
450
Description
Modbus register that specifies
the parameters to be logged.
Only parameters of type float,
and type unsigned with a maxi‐
mum size of 4 bates can be log‐
ged. 65535 = Register disabled.
Modbus register that specifies
the parameters to be logged.
Only parameters of type float,
and type unsigned with a maxi‐
mum size of 4 bates can be log‐
ged. 65535 = Register disabled.
Modbus register that specifies
the parameters to be logged.
Only parameters of type float,
and type unsigned with a maxi‐
mum size of 4 bates can be log‐
ged. 65535 = Register disabled.
Modbus register that specifies
the parameters to be logged.
Only parameters of type float,
and type unsigned with a maxi‐
mum size of 4 bates can be log‐
ged. 65535 = Register disabled.
Description
Enable or disable simulation of
the current output.
Enter the current output value
for simulation.
Set the output functionality you
want the channel to operate.
Enable or disable simulation of
the current output.
Default value Value range
[unit]
Default value Value range
[unit]
Disabled
● Disabled
● Enabled
4.00 mA
● 3.5 to 25.00
mA
Status output
● Current output
● Frequency
output
● Pulse output
● Status output
Disabled ● Disabled
● Enabled
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
Access
level
User
User
User
User