Siemens MASS 2100 Operating Instructions Manual page 327

HMI menu ID Parameter
2.4.3.8.9 Device alarms
2.4.3.8.10 Channel 1 alarms
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
B.5 Inputs and outputs
Default value Value range
[unit]
● 148 Transm.
Temp. above
alarm limit
● 149 Transm.
Temp. below
alarm limit
● 150 Sensor
signal
disrupted
● 159 Internal
error in
transmitter
● 153 CH1 loop
cur. In lower
saturation
● 154 CH1 loop
cur. In upper
saturation
● 155 CH1 loop
current
deviation
● 158 CH 1
cable break
Default settings
Access
level
User
User
327