Step 5: Finishing The Transmitter Connection - Siemens MASS 2100 Operating Instructions Manual

Sitrans f coriolis flowmeters

Hide thumbs Also See for MASS 2100:

Table of Contents

Step 5: Finishing the transmitter connection

Connection check-up

1. Check individual wire installation by tugging firmly.

2. Firmly tighten cable glands and insert blanking plugs in unused cable entries.

3. Remove O-ring from lid.

4. Reinstate lid and screw in until mechanical stop. Wind back lid by one turn.

5. Mount O-ring by pulling it over the lid and tighten lid cover until you feel friction from the O-

ring on both sides. Wind lid further by one quarter of a turn to seal on the O-ring.

6. Reinstate and tighten lid lock screw.

7. Ensure that moisture does not penetrate to inside of electronics housing by creating a drip

loop (bend cables downward) immediately before cable glands.

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

5.2 Connecting MASS 2100/FC300

Fc300 Fct030