Siemens MASS 2100 Operating Instructions Manual page 317

HMI menu ID Parameter
2.4.3.7.7 Pulse width units
2.4.3.7.8 Pulse width
2.4.3.7.9 Polarity
2.4.3.7.10 Fail-safe behavior
2.4.3.7.11 Fail-safe value
2.4.3.7.12 Fail-safe minimum time
2.4.3.8 Digital output
2.4.3.8.1 Status mode
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
Set the time units for configuring
pulse width
Define the pulse duration, Long
duration pulses can overlap at
high flow rate
Select the polarity of the output
Select current output reaction in
case of a fault.
Define fail-safe current output
value if 'Fail-safe behaviour' pa‐
rameter is set to 'Fail-safe value'.
Minimum time the output stays
in fail-safe mode. Short events
will be prolonged.
Select the functionality for digital
output. Only applicable when
'Operation Mode' is set to 'Sta‐
tus'.
B.5 Inputs and outputs
Default value Value range
[unit]
s
● s
● ms
● µs
0.10 s
● 0.00 to 4.00 s
Active high level ● Active high
level
● Active low
level
Last reliable val‐
● Last reliable
ue
value
● Hold
● Current value
● Fail-safe
value
0
● 0 to 12500
0 s
● 0 to 100 s
Alarm class
● Alarm class
● Individual
alarms
● Primary valve
dosing control
● Secondary
valve dosing
control
Default settings
Access
level
User
User
User
User
User
User
User
317