Commissioning With Pdm; Operating Via Simatic Pdm - Siemens MASS 2100 Operating Instructions Manual

Commissioning

6.4 Commissioning with PDM

2
3
4-6
7
8-15
16
*: Set Operation Mode to Status Mode and set Status Mode to control Primary Valve or
Secondary Valve.
**: Set Status Mode to Primary Valve or Secondary Valve.
***: Set Operation Mode to Dosing Control.
For dosing setup, see Valve control configuration (Page 157).
6.4 Commissioning with PDM
For commissioning with SIMATIC PDM, see separate function manual for MODBUS, HART
or PROFIBUS.
6.4.1

Operating via SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain process devices.
See also
www.siemens.com/simatic-pdm (www.siemens.com/simatic-pdm)
110
Dosing Mode
Dosing options
Configure Output
Process Value
Configure recipe
Active Recipe
Select the dosing mode to control the valve(s) on the output
Setup instructions for the selected dosing mode
Configure the output to control the valves
Select the process value
Configure the recipe (valve control and fault handling)
Select a dosing recipe
Operating Instructions, 06/2017, A5E39789040-AA
MASS 2100 & FC300 (FCT030)