Siemens MASS 2100 Operating Instructions Manual page 288

Default settings
B.4 Totalizer
HMI menu ID Parameter
2.3.2.10.4 2) Lower alarm limit
2.3.2.10.5 2) Hysteresis
2.3.2.10.3) Upper alarm limit
2.3.2.10.23) Upper warning limit
2.3.2.10.33) Lower warning limit
2.3.2.10.4 3) Lower alarm limit
2.3.2.10.5 3) Hysteresis
Process Value is set to Mass flow
1)
Process Value is set to Volume flow
2)
Process Value is set to Standard volume flow
3)
Table B-9 totalizer 3
HMI menu ID Parameter
2.3.3.1 Process value
2.3.3.2 Unit 1)
2.3.3.2 Unit 2)
2.3.3.2 Unit 3)
2.3.3.3 Custom units
288
Description
Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
Enter the hysteresis to avoid un‐
wanted rapid switching.
Set upper alarm limit. Alarm is
triggered if totalizer 2 value is
above the limit.
Set upper warning limit. Waning
is triggered if totalizer 2 value is
above the limit.
Set lower alarm limit. Warning is
triggered if totalizer 2 value is
above the limit.
Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
Enter the hysteresis to avoid un‐
wanted rapid switching.
Description
Select process value for totaliza‐
tion.
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
Define a name for the custom
units. The custom units can then
be selected in the units list.
Default value Value range
[unit]
[m3]
0
[m3]
[normal m3]
[normal m3]
[normal m3]
[normal m3]
0
[normal m3]
Default value Value range
[unit]
Mass flow ● Mass flow
● Volume flow
● Standard
volume flow
● Fraction A
● Fraction B
kg Kg, t, STon, T, oz,
lb, Custom
L L, hl, m³, gal,
i.ga.,bbl31.5,
bbl31, bbl42, in³,
ft³, yd³, bush, Cus‐
tom
NL Nl, Nm³, SI, Sft³,
Sm³, Custom
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
User
User
User
User
User
User
User
Access
level
User
User
User
User
User