8.6
Inputs and outputs
The hardware functionality of input and output is fixed when ordering the product. The available
configuration is described in the following table:
Channel
1
2
3
4
8.6.1
Current output
All four channels can be configured as current output.
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
HW configuration
(fixed when ordering)
Current output
Signal output
Signal output
Relay output
Signal input
Current input
Signal output
Relay output
Signal input
Current input
SW configuration
available to the user
Current (4-20 mA) HART
● Current (0/4-20 mA)
● Frequency or pulse
● Three-stage analog valve dosing control
● Discrete one or two-valve dosing control
● Operational and alarm status
● Current (0/4-20 mA)
● Frequency or pulse
● Redundant frequency or pulse
● Three-stage analog valve dosing control
● Discrete one or two-valve dosing control
● Operational and alarm status
● Discrete one or two-valve dosing control
● Operational and alarm status
● Dosing control
● Totalizer reset
● Remote zero adjust
● Force or freeze output(s)
● Current (0/4-20 mA)
● Frequency or pulse
● Three-stage analog valve dosing control
● Discrete one or two-valve dosing control
● Operational and alarm status
● Discrete one or two-valve dosing control
● Operational and alarm status
● Dosing control
● Totalizer reset
● Remote zero adjust
● Force or freeze output(s)
Functions
8.6 Inputs and outputs
143