Siemens MASS 2100 Operating Instructions Manual page 360

Default settings
B.5 Inputs and outputs
HMI menu ID Parameter
2.4.5.8.9 Device alarms
2.4.5.8.10 Channel 1 alarms
2.4.5.8.11 Input/output alarms (1)
360
Description
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
Default value Value range
[unit]
● 148 Transm.
Temp. above
alarm limit
● 149 Transm.
Temp. below
alarm limit
● 150 Sensor
signal
disrupted
● 159 Internal
error in
transmitter
● 153 CH1 loop
cur. In lower
saturation
● 154 CH1 loop
cur. In upper
saturation
● 155 CH1 loop
current
deviation
● 158 CH 1
cable break
● 192 Dosing
time overrun
● 194 Invalid
proc. val.
During dosing
● 198 CH2
output
frequency too
low
● 199 CH2
output
frequency too
high
● 213 Invalid
dosing
configuration
● 214 Channel 2
simulated
● 217 Process
values frozen
● 218 All
outputs forced
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
User
User