Siemens MASS 2100 Operating Instructions Manual page 289

HMI menu ID Parameter
2.3.3.4 Custom conversion fac‐
tor
2.3.3.5 Decimal Places 1) 2) 3)
2.3.3.6 Direction
2.3.3.7 Fail-safe behaviour
2.3.3.9 Preset
2.3.2.10 Alarm and warning limits
2.3.3.10.11) Upper alarm limit
2.3.3.10.21) Upper warning limit
2.3.3.10.31) Lower warning limit
2.3.3.10.4 1) Lower alarm limit
2.3.3.10.5 1) Hysteresis
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
Define a mass factor for the cus‐
tom units. The factor is based on
SI mass units kg
Define the decimal point for the
process value triggered in the
Local display.
Select totalizing direction.
Select reaction of the totalizer
function in case of unreliable
process flow value.
Reset totalizer 3 to selected pre‐
set value
Set upper alarm limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Set upper warning limit. Waning
is triggered if totalizer 3 value is
above the limit.
Set lower alarm limit. Warning is
triggered if totalizer 3 value is
above the limit.
Set lower warning limit. Alarm is
triggered if totalizer 3 value is
above the limit.
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning
Default value Value range
[unit]
1) 1)
2
● Auto
● No decimal
place
● 1
● 2
● 3
● 4
● 5
● 6
Forward count‐
● Forward
ing
counting and
backward
counting
● Forward
counting
● Backward
counting
● Hold
Run
● Run
● Hold
● Memory
● Cancel
● Ok
[kg]
[kg]
[kg]
[kg]
0
[kg]
Default settings
B.4 Totalizer
Access
level
User
User
User
User
User
User
User
User
User
User
289