Step 2: Preparing For The Transmitter Connections - Siemens MASS 2100 Operating Instructions Manual

Sitrans f coriolis flowmeters

Hide thumbs Also See for MASS 2100:

Table of Contents

5.2 Connecting MASS 2100/FC300

Step 2: Preparing for the transmitter connections

Access to terminal compartment

As long as the device is energized, the lid of the housing on the sensor connection area may

only be opened by qualified personnel.

Before removing the terminal cover, the auxiliary power must be switched off from all poles.

Following installation, the terminal cover must be screwed back on again.

1. Remove blind plugs where required and mount cable glands.

2. Remove lid lock screw for terminal connections lid.

3. Remove lid for terminal connections.

A label showing the configuration is placed at the back of the terminal connections lid.

Input/output connection (channels 2 to 4)

Power supply connection

Current output/communication outputs (channel 1)

Operating Instructions, 06/2017, A5E39789040-AA

MASS 2100 & FC300 (FCT030)

Fc300 Fct030