Operating Mass 2100/Fc300 With Fct030; Chapter Overview Operating; Operating Instructions; Local Display (Hmi) - Siemens MASS 2100 Operating Instructions Manual

Operating MASS 2100/FC300 with FCT030

7.1

Chapter overview Operating

A considerable amount of information regarding the operation and status of the flowmeter is
available to the user via the local display (HMI ) and SIMATIC PDM.
In this chapter you will find information on how to monitor and operate the device using the

local display (HMI).

7.2

Operating instructions

7.2.1 Local display (HMI)
Operation via local user interface
The device is operated with the capacitive proximity keypad on the local user interface.
The elements are actuated by touching the glass panel above the appropriate key. The glass
is 10 mm (3/8") thick. Pressing harder will not activate the key, but using a thumb instead of a
finger tip will help. The text display above the operating elements gives a menu-guided
operation of the individual device function/parameters. Successful operation of the key is
confirmed by a small green LED at the right of the display.
①
②
③
Figure 7-1
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Full graphical display
LED (for indication of key operation)
Capitance proximity keypad
Local user interface
7
111