HMI menu ID
Parameter
2.5.5.4
Decimal Places
2.5.5.5
User Calibration
2.5.5.5.2
Fixed Compensation
2.5.5.5.2
Fixed Compensation
2.5.5.5.2
Fixed Compensation
2.5.5.6
Valve Control
2.5.5.6.1
Stage Setup Format
2.5.5.6.2
Stage 1 Primary Open
2.5.5.6.3
Stage 1 Primary Close
2.5.5.6.4
Stage 2 Secondary
Open
2.5.5.6.5
Stage 2 Secondary
Close
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
Define the decimal point for the
process value displayed in the
Local User Interface.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Specify if valve control parame‐
ters are defined as absolute or
relative values (% of dosing
amount).
Define the dosing amount value
to open the primary valve. The
value is in % of defined dosing
amount.
Define the dosing amount value
to close the primary valve. The
value is in % of defined dosing
amount.
Define the dosing amount value
to open the secondary valve.
The value is in % of defined dos‐
ing amount.
Define the dosing amount value
to close the secondary valve.
The value is in % of defined dos‐
ing amount.
Default value
Value range
[unit]
2
● Auto
● No Decimal
place
● 1
● 2
● 3
● 4
● 5
● 6
[kg]
L
SI
Relative
● Relative
● Absolute
0
0.0 to 100.0
[%]
80
0.0 to 100.0
[%]
20
0.0 to 100.0
[%]
100
0.0 to 100.0
[%]
Default settings
B.6 Dosing
Access
level
User
User
User
User
User
User
User
User
User
379