Siemens MASS 2100 Operating Instructions Manual page 438

Default settings
B.9 Maintenance and diagnostics
HMI menu ID Parameter
3.1.19.4 Serial Number
3.1.19.5 Firmware Revision
Table B-35 Maintenance
HMI menu ID Parameter
3.3.1 Copy configuration
3.3.2 Spare part replacement
3.3.2.1 Transmitter
3.3.2.1.1 Replace transmitter
3.3.2.1.2 Replace transmitter cas‐
sette
3.3.2.1.2 Replace sensor casette
3.3.8.4 HMI Hardware Revision HMI hardware version.
3.3.2.2 Sensor
3.3.2.2.1 Replace DSL
3.3.2.2.2 Replace sensor
3.3.3 Operation time
3.3.3.1 Operating Time Total
3.3.3.2 Operating Time
Table B-36 Diagnostics
HMI menu ID Parameter
3.4.1 Sensor
3.4.1.1 Driver current
438
Description
Unique sensor serial number. Al‐
so shown on the device name‐
plate.
Firmware version of the sensor.
Description
Copy configuration from the
SensorFlash to the device
This will restore the data from
the transmitter on the transmitter
cassette module.
This will restore the data from
the SensorFlash on the transmit‐
ter cassette module.
This will restore the data from
the SensorFlash on the sensor
cassette module.
This will restore the sensor-spe‐
cific data from the SensorFlash
on the sensor DSL module.
This will restore the sensor-spe‐
cific data from the SensorFlash
on the sensor
Total operating time of the trans‐
mitter since first power up.
Operating time of the transmitter
since last power up.
Description
The actual current value that ex‐
cites the sensor. High current:
check process conditions.
Default value Value range
[unit]
Default value Value range
[unit]
Default value Value range
[unit]
[A]
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
Read
only
Read
only
Access
level
User
Expert
Expert
Expert
Read
only
Expert
Expert
Read
only
Read
only
Access
level
Read
only