Connecting
5.2 Connecting MASS 2100/FC300
5. Connect ground to terminal
manner shown below at right.
6. Close and latch power supply terminal protection cover.
7. Tighten cable gland.
5.2.4.7
Connecting the power supply (with DSL)
1. Open enclosure lid, unscrew power supply terminal protection cover screw, and remove
protection cover.
2. Remove blind plug and fit cable gland.
76
①
L/+
②
N/-
③
Protective Earth (PE)
AC connection
Power: 100 to 240 V AC, 47 to 63 Hz
and power to terminals L/+ and N/- using wiring tool in the
Operating Instructions, 06/2017, A5E39789040-AA
1
2
3
DC connection
Power: 19.2 to 28.8 V DC
MASS 2100 & FC300 (FCT030)