Siemens MASS 2100 Operating Instructions Manual page 482

HMI menu structure
D.1 Main menu
Level 1
No. Name
2 Setup
3 Maintenance & Diagnostics
4 Communication
5 Security
6 Language
See also
Inputs/Outputs wizard (menu item 1.4) (Page 103)
482
Level 2
No. Name
2.1 Sensor
2.2 Process values
2.3 Totalizer
2.4 Inputs and outputs
2.5 Dosing
2.7 Date and time
2.8 Local display
3.1 Identification
3.2 Diagnostic events
3.3 Maintenance
3.4 Diagnostics
3.5 Peak values
3.6 Charateristics
3.7 Sensor flash
3.8 Simulation
3.9 Audit trail
3.10 Self test
3.11 Resets
3.12 Firmware update
4.1 USB (Service channel)
4.2 HART (channel 1)
4.3 Modbus (channel 1)
4.4 Profibus DP/PA
5.1 Change user PIN
5.2 Change expert PIN
5.3 Recovery ID
5.4 PIN recovery
5.5 Activate user PIN
5.6 Deactivate user PIN
5.7 Auto logout
5.8 Logout
More information
Menu item 2.1: Sensor (Page 483)
Menu item 2.2: Process values
(Page 484)
Menu item 2.3: Totalizer (Page 487)
Menu item 2.4: Inputs and outputs
(Page 488)
Menu item 2.5: Dosing (Page 495)
Menu item 2.7: Date and time
(Page 500)
Menu item 2.8: Local display (Page 501)
Menu item 3.1: Identification (Page 503)
Menu item 3.2: Diagnostic events
(Page 504)
Menu item 3.3: Maintenance (Page 505)
Menu item 3.4: Diagnostics (Page 505)
Menu item 3.5: Peak values (Page 507)
Menu item 3.6: Characteristics
(Page 507)
Menu item 3.7: SensorFlash (Page 508)
Menu item 3.8: Simulation (Page 510)
Menu item 3.9: Audit trail (Page 511)
Menu item 3.10: Self test (Page 511)
Menu item 3.11: Resets (Page 512)
Menu item 3.12: Firmware update
(Page 512)
Menu item 5.1: Change User PIN
Menu item 5.1: Change expert
Menu item 5.1: Recovery ID
Menu item 5.1: PIN recovery
Menu item 5.1: Activate user PIN
Menu item 5.1: Deactivate user PIN
Menu item 5.1: Auto logout
Menu item 5.1: Logout
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA