Resets; Firmware Update; Communication; B.11 Resets - Siemens MASS 2100 Operating Instructions Manual

Default settings
B.13 Communication
Table B-42 Self test
HMI menu ID Parameter
3.10.1 Display Test
B.11

Resets

Table B-43 Reset
HMI menu ID Parameter
3.11.1 Restore ordered config‐
uration
3.11.2 Device restart
B.12

Firmware update

Table B-44 Firmware update
HMI menu ID Parameter
3.11.1 Firmware update
B.13

Communication

Table B-45 Communication
HMI menu ID Parameter
4.1 Service channel (USB)
4.1.1 USB mode
4.1.2 Auto mode
4.1.3 MSD connect
4.2 HART Channel 1
466
Description
Display test
Description
Reset all parameters to custom‐
er ordered settings
Restart the device without dis‐
connecting the power
Description
Update the firmware
Description
Returns the information which
USB mode is currently activated.
Defines if the device is automat‐
ically connected to a PC as MSD
when USB cable is connected.
Connects/disconnects the trans‐
mitter as mass storage device to/
from PC.
Default value Value range
[unit]
Default value Value range
[unit]
Cancel
● Cancel
● Ok
Cancel
● Cancel
● Ok
Default value Value range
[unit]
Default value Value range
[unit]
USB communi‐
● USB
cation
communicatio
n
● Mass storage
Disabled
● Disabled
● Enabled
Disconnect
● Disconnect
● Connect
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
User
Access
level
User
User
Access
level
Expect
Access
level