Siemens MASS 2100 Operating Instructions Manual page 467

HMI menu ID Parameter
4.2.1 Polling address (SW)
4.2.2 Polling address (HW)
4.2.3 TAG
4.2.4 HART device Type
4.2.5 HART revision
4.2.6 Response preambles
4.2.7 Dynamic variable mapping
4.2.7.1 SV process value
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
Enter the device HART address.
HW address device address
overwrites the SW device ad‐
dress.
Hardware device address. The
HW device address is config‐
ured by DIP switch in the device.
Enter a unique Short TAG name
for the device / measurement
point.
Device Identification: Uniquely
identifies the Field Device when
combined with the Manufacturer
Identification and Device Type.
Device Revision Level defined in
HART protocol.
Response preambles
Select the Secondary HART
process value.
B.13 Communication
Default value Value range
[unit]
0 0 to 63
0 0 to 16
Up to 8 characters User
34
0
5 5 to 20
Volume flow ● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Standard
density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
● Totalizer 1
● Totalizer 2
● Totalizer 3
Default settings
Access
level
User
Read
only
Read
oSLy
Read
oSLy
User
467