Siemens MASS 2100 Operating Instructions Manual page 279

HMI menu ID Parameter
2.2.5.7 Empty Tube Detection
2.2.5.8 Empty Tube Limit
Table B-5 Medium temperature
HMI menu ID Parameter
2.2.6.1 Units
2.2.6.2
Decimal places
2.2.6.3 Alarm and warning limits
2.2.6.3.1 Upper Limit Alarm
2.2.6.3.2 Upper Limit Warning
2.2.6.3.3 Lower Limit Warning
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Description
"Activate empty tube detection.
""On"": Density value below
empty tube limit triggers alarm.
All flow rate values are forced to
zero %.
"Set density value for empty
tube limit.
Density value below limit trig‐
gers an alarm."
Description
Select unit for displayed temper‐
ature. Unit is not applied at com‐
munication interface.
Define the decimal point for the
process value displayed in the
Local User Interface.
Set upper alarm limit. Alarm is
triggered if temperature value is
above the limit.
Set upper warning limit. Warning
is triggered if temperature value
is above the limit.
Set lower warning limit. Warning
is triggered if temperature value
is below the limit.
B.3 Standard volume flow
Default value Value range
[unit]
Off
● Off
● On
500 -14000.0 to
[kg/m³] 14000.0
Default value Value range
[unit]
°C
● °C (degrees
Celcius)
● °F (degrees
Fahrenheit)
● °R degrees
Rankine
● K (kelvins)
2
● Auto
● No decimal
place
● 1
● 2
● 3
● 4
● 5
● 6
200 -50 to 200
[°C]
200 -50 to 200
[°C]
-50 -50 to 200
[°C]
Default settings
Access
level
User
User
Access
level
User
User
User
User
User
279