Siemens MASS 2100 Operating Instructions Manual page 396

Default settings
B.6 Dosing
HMI menu ID Parameter
2.5.8.4 Decimal Places
2.5.8.5 Calibration
2.5.8.5.2 Fixed Compensation
2.5.8.5.2 Fixed Compensation
2.5.8.5.2 Fixed Compensation
2.5.8.6 Valve Control
2.5.8.6.1 Stage Setup Format
2.5.8.6.2 Stage 1 Primary Open
2.5.8.6.3 Stage 1 Primary Close
2.5.8.6.4 Stage 2 Secondary
Open
2.5.8.6.5 Stage 2 Secondary
Close
396
Description
Define the decimal point for the
process value displayed in the
Local User Interface.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for ap‐
plication delays in closing the
valves.
Specify if valve control parame‐
ters are defined as absolute or
relative values (% of dosing
amount).
Define the dosing amount value
to open the primary valve. The
value is in % of defined dosing
amount.
Define the dosing amount value
to close the primary valve. The
value is in % of defined dosing
amount.
Define the dosing amount value
to open the secondary valve.
The value is in % of defined dos‐
ing amount.
Define the dosing amount value
to close the secondary valve.
The value is in % of defined dos‐
ing amount.
Default value Value range
[unit]
2
● Auto
● No Decimal
place
● 1
● 2
● 3
● 4
● 5
● 6
[kg]
L
SL
Relative
● Relative
● Absolute
0 0.0 to 100.0
[%]
80 0.0 to 100.0
[%]
20 0.0 to 100.0
[%]
100 0.0 to 100.0
[%]
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Access
level
User
User
User
User
User
User
User
User
User