Siemens MASS 2100 Operating Instructions Manual page 202

Diagnosing and troubleshooting
10.2 Fault codes and corrective actions
ID/ Diagnostic
Icons
166 Standard volume flow
167 Totalizer 1
168 Totalizer 2
169 Totalizer 3
170 Loop current
172 Transmitter
173 Sensor
174 Display
175 IO
202
Action
Value simulated. Disable 'Simulation' before re‐
turning to normal operation
Value simulated. Disable 'Simulation' before re‐
turning to normal operation
Value simulated. Disable 'Simulation' before re‐
turning to normal operation
Value simulated. Disable 'Simulation' before re‐
turning to normal operation
Loop current simulated. Disable 'Simulation' be‐
fore returning to normal operation
FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
Comment
Only hydrocarbon
Only HART devices
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA