Finishing The Transmitter Connection - Siemens SITRANS FS230 Compact Operating Instructions

Connecting

4.7 Finishing the transmitter connection

5. Connect ground to terminal
below at right using a screwdriver.
Note
The terminal connector is detachable
For easier access unplug the terminal connector. After connecting the wires, plug the
terminal connector back in.
6. Tighten cable gland.
7. Mount power supply protection cover and fasten protection cover screw.
4.7 Finishing the transmitter connection
Connection check-up
1. Check individual wire installation by tugging firmly.
2. Firmly tighten cable glands and insert blanking plugs in unused cable entries.
3. Close lid.
54
①
L/+
②
N/-
③
Protective Earth (PE)
AC connection
Power: 85 to 264 V AC, 47 to 63 Hz
and power to terminals L/+ and N/- in the manner shown
Compact Operating Instructions, 12/2019, A5E38755607-AB
DC connection
Power: 19.2 to 28.8 V DC
SITRANS FS230