Removable Hdd Kit; Document Scan Lock Kit-B2; Inch/250 Gb Hdd-N1; Inch/1 Tb Hdd-P1 - Canon imageRUNNER ADVANCE C7500 III Series Customer Expectation Document

7.4.3. Removable HDD Kit

• Enables the hard disk of the machine to be physically removed while the
machine is unattended or not in use.
• Provides a layer a data security for government agencies and corporate
enterprises who need to ensure that the data stored on the hard disk is
physically secured when the machine is no longer in use.
• Includes a carrying case and a key to enable easy removal and storage.

7.4.4 Document Scan Lock Kit-B2

• Enables the user to embed hidden user information or copy restriction
information in the output when documents are copied or printed.
• Enforces the policies written to track information embedded in the document to
prevent users from performing restricted tasks, such as copying, sending,
scanning, or storing specific documents (Scan Lock function), and identifies the
user that output the document (Tracking function).
• Requires license activation via the LMS.
• Cannot be used with the optional Secure Watermark (standard on the
imageRUNNER ADVANCE C7500 III Series) and the Job Hold function.
• The Image Data Analyzer Board, which is needed to detect the scan lock
information, restrict unauthorized copying, and analyze the tracking information
is included with this kit.

7.4.5 2.5 inch/250 GB HDD-N1

Required to use the Mirroring function of the HDD Mirroring Kit.
NOTE
• The 2.5 inch/250 GB HDD-N1 does not increase the overall storage capacity of
the machine.
• If the machine has the standard 2.5 inch/250 GB HDD, an additional optional
2.5 inch/250 GB HDD-N1 is required to encrypt and back up the data using the
HDD Mirroring Kit.
• If the standard 2.5 inch/250 GB HDD has been replaced with the optional 2.5
inch/1 TB HDD-P1, an additional optional 2.5 inch/1 TB HDD-P1 is required to
back up the data using the HDD Mirroring Kit.

7.4.6 2.5 inch/1 TB HDD-P1

Replace the machine's standard 250 GB hard disk drive with the 2.5 inch/1 TB
HDD-P1 to increase the HDD capacity.
NOTE
If the machine is configured with an optional 2.5 inch/1 TB HDD-P1, an
additional optional 2.5 inch/1 TB HDD-P1 is required to back up the data using
the HDD Mirroring Kit.
Version 3 imageRUNNER ADVANCE C7500 III Series Customer Expectations Document
imageRUNNER ADVANCE C7500 III Series Customer Expectations Document
Page 75