Display Lldp Tlv-Config - HP 3100 v2 Series Command Reference Manual

Field
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of interface Ethernet 1/0/1.
<Sysname> display lldp tlv-config interface ethernet 1/0/1
LLDP tlv-config of port 1[Ethernet1/0/1]:
NAME
Basic optional TLV:
Port Description TLV
Description
LLDP operating mode of the port:
•
Tx_Rx—The port can send and receive LLDP frames.
•
Rx_Only—The port can only receive LLDP frames.
•
Tx_Only—The port can only send LLDP frames.
•
Disable—The port cannot send or receive LLDP frames.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of CDP neighbors connecting to the port.
Number of optional TLVs contained in an LLDPDU sent through the
port.
Number of unknown TLVs contained in all received LLDPDUs.
STATUS DEFAULT
YES YES
200