Reset Mvrp Statistics - HP 3100 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type trunk
[Sysname-Ethernet1/0/1] port trunk permit vlan all
[Sysname-Ethernet1/0/1] mvrp registration fixed

reset mvrp statistics

Syntax
reset mvrp statistics [ interface interface-list ]
View
User view
Default level
2: System level
Parameters
interface interface-list: Specifies an Ethernet interface list in the form of interface-list =
{ interface-type interface-number1 [ to interface-type interface-number2 ] }&<1-10>, where
interface-type interface-number specifies an interface by its type and number and &<1-10> indicates
that you can specify up to 10 interfaces or interface ranges. If this option is not specified, the
command clears MVRP statistics of all ports.
Description
Use reset mvrp statistics to clear the MVRP statistics of ports.
Related commands: display mvrp statistics.
Examples
# Clear the MVRP statistics of all ports.
<Sysname> reset mvrp statistics
224