Enable Snmp Trap Updown; Interface Bridge-Aggregation - HP 3100 v2 Series Command Reference Manual

Field
Oper-Key
Flag
Remote
Actor
Partner

enable snmp trap updown

Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use enable snmp trap updown to enable linkUp/linkDown trap generation for the aggregate
interface.
Use undo enable snmp trap updown to disable linkUp/linkDown trap generation for the aggregate
interface.
By default, linkUp/linkDown trap generation is enabled for an aggregate interface.
For an aggregate interface to generate linkUp/linkDown traps when its link state changes, you must
also enable linkUp/linkDown trap generation globally with the snmp-agent trap enable [ standard
[ linkdown | linkup ] * ] command.
For more information about the snmp-agent trap enable command, see Network Management and
Monitoring Command Reference.
Examples
# Enable linkUp/linkDown trap generation on Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] enable snmp trap updown

interface bridge-aggregation

Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Description
Operational key.
LACP protocol state flag.
Information about the remote end.
Local port type and number.
Remote port index.
74