Mvrp Enable - HP 3100 v2 Series Command Reference Manual

View
System view
Default level
2: System level
Description
Use mvrp global enable to enable MVRP globally.
Use undo mvrp global enable to restore the default.
By default, MVRP is disabled globally.
Disabling MVRP globally also disables MVRP on all ports.
Related commands: display mvrp running-status and mvrp enable.
Examples
# Enable MVRP globally.
<Sysname> system-view
[Sysname] mvrp global enable

mvrp enable

Syntax
mvrp enable
undo mvrp enable
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Description
Use mvrp enable to enable MVRP on a port.
Use undo mvrp enable to disable MVRP on a port.
By default, MVRP is disabled on a port.
To enable MVRP on a port, first enable MVRP globally.
Disabling MVRP globally also disables MVRP on each port.
This command is available only on trunk ports.
You cannot change the link type of MVRP-enabled trunk port.
Related commands: display mvrp running-status and mvrp global enable.
Examples
# Configure Ethernet 1/0/1 as a trunk port, and enable MVRP on it.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type trunk
[Sysname-Ethernet1/0/1] port trunk permit vlan all
[Sysname-Ethernet1/0/1] mvrp enable
222