Port-Group Manual - HP 3100 v2 Series Command Reference Manual

•
For 100-Mbps ports, the max-kbps argument ranges from 1 to 100,000 kbps.
•
For 1000-Mbps ports, the max-kbps argument ranges from 1 to 1,000,000 kbps.
Description
Use multicast-suppression to set the multicast suppression threshold on one or multiple Ethernet
interfaces.
Use undo multicast-suppression to restore the default.
By default, Ethernet interfaces do not suppress multicast traffic.
If you execute this command in Ethernet interface view, the configurations take effect only on the
interface. If you execute this command in port group view, the configurations take effect on all ports
in the port group.
When multicast traffic exceeds the threshold you configure, the system discards multicast packets
until the multicast traffic drops below the threshold.
When you configure the suppression threshold in kbps, the actual suppression threshold might be
different from the configured one as follows:
•
If the configured value is smaller than 64, the value of 64 takes effect.
•
If the configured value is greater than 64 but not a multiple of 64, the multiple of 64 that is
greater than and closest to the configured value takes effect.
NOTE:
• If you set different multicast suppression thresholds in Ethernet interface view or port group view
multiple times, the one configured last takes effect.
• For a particular type of traffic, configure either storm suppression or storm control, but not both. If
both of them are configured, you may fail to achieve the expected storm control effect.
Examples
# Set the multicast threshold to 20% on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] multicast-suppression 20
# Set the multicast threshold to 20% on all ports in the port group named group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member ethernet 1/0/1
[Sysname-port-group-manual-group1] group-member ethernet 1/0/2
[Sysname-port-group-manual-group1] multicast-suppression 20
# Set the multicast suppression threshold to 10000 kbps on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] multicast-suppression kbps 10000
Info: The actual value is 10048 on this port currently.

port-group manual

Syntax
port-group manual port-group-name
undo port-group manual port-group-name
29