Lldp Encapsulation Snap; Lldp Fast-Count - HP 3100 v2 Series Command Reference Manual

By default, LLDP is enabled on a port, and enabled globally.
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo lldp enable

lldp encapsulation snap

Syntax
lldp encapsulation snap
undo lldp encapsulation
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use lldp encapsulation snap to configure the encapsulation format for LLDP frames as SNAP on a
port or a group of ports.
Use undo lldp encapsulation to restore the default encapsulation format for LLDP frames.
By default, the encapsulation format for LLDP frames is Ethernet II.
NOTE:
The command does not apply to LLDP-CDP packets, which use only SNAP encapsulation.
Examples
# Configure the encapsulation format for LLDP frames as SNAP on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lldp encapsulation snap

lldp fast-count

Syntax
lldp fast-count count
undo lldp fast-count
View
System view
Default level
2: System level
205