Table of Contents
Advertisement
Field
Reinit delay
Transmit max credit
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV
display lldp tlv-config
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ agent { nearest-bridge |
nearest-customer | nearest-nontpmr } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
agent: Specifies an LLDP agent type. If no agent type is specified, the command displays the types
of advertisable optional LLDP TLVs for all LLDP agents.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
Description
LLDP reinitialization delay.
Token bucket size for sending LLDP frames.
Trap transmission interval.
Number of LLDP frames sent each time fast LLDP frame transmission
is triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP operating mode of the port:
•
Tx_Rx—The port can send and receive LLDP frames.
•
Rx_Only—The port can only receive LLDP frames.
•
Tx_Only—The port can only send LLDP frames.
•
Disable—The port cannot send or receive LLDP frames.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of CDP neighbors connecting to the port.
Number of optional TLVs contained in an LLDP frame sent through the
port.
Number of unknown TLVs contained in a received LLDP frame.
266
Advertisement
Table of Contents
