Mac Address Table Configuration Commands; Display Mac-Address - HP 3100 v2 Series Command Reference Manual

MAC address table configuration
commands
The MAC address table can contain only Layer 2 Ethernet ports and Layer 2 aggregate interfaces.
This feature covers only the unicast MAC address table. For information about configuring static
multicast MAC address table entries for IGMP snooping and MLD snooping, see IP Multicast
Configuration Guide.

display mac-address

Syntax
display mac-address [ mac-address [ vlan vlan-id ] | [ [ dynamic | static ] [ interface interface-type
interface-number ] | blackhole ] [ vlan vlan-id ] [ count ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
blackhole: Displays blackhole MAC address entries, which do not age and can be added and
deleted. Packets with a matching destination MAC address are discarded.
vlan vlan-id: Displays MAC address entries of the specified VLAN, where vlan-id is in the range of 1
to 4094.
count: Displays the number of MAC address entries specified by related parameters in the
command. When this keyword is used, the command displays only the number of specified MAC
address entries, rather than related information about these MAC address entries.
mac-address: Displays MAC address entries of a specified MAC address, in the format of H-H-H.
dynamic: Displays dynamic MAC address entries, which can be aged.
static: Displays static MAC address entries, which do not age.
interface interface-type interface-number: Displays the MAC address learning status of the
specified interface. interface-type interface-number specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mac-address to display information about the MAC address table.
If you execute this command without specifying any parameters, it displays information of all MAC
address entries on the device, including unicast MAC address entries and static multicast MAC
address entries.
50