Display Vlan - HP 3100 v2 Series Command Reference Manual

Field
The brief information of interface(s)
under route mode
Link: ADM - administratively down;
Stby - standby
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description
Cause

display vlan

Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan-id1: Displays information about a VLAN specified by VLAN ID, in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs specified by a VLAN ID range. The vlan-id2
argument cannot be smaller than the vlan-id1 argument.
all: Displays all VLAN information but the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are generated through GVRP, MVRP, or those distributed by a RADIUS server.
Description
and the number of the dropped packets.
Brief information about Layer 3 interfaces.
Link layer state of the interface:
•
ADM—The interface has been administratively shut down. To
recover its physical state, perform the undo shutdown
command.
•
Stby—The interface is operating as a standby interface.
If the network layer protocol state of an interface is shown as UP, but
its link is an on-demand link or not present at all, its protocol attribute
includes the spoofing flag (an s in parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To
recover its physical state, perform the undo shutdown
command.
Protocol connection state of the interface, which can be UP, DOWN,
or UP(s).
Main IP address of the interface.
Description of the interface.
Cause of a DOWN physical link. If the port has been shut down with
the shutdown command, this field displays Administratively. To
restore the physical state of the interface, use the undo shutdown
command.
138