HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Instructions Manual

Edge switch 2/24 rack mount kit installation instructions.
Hide thumbs
hp StorageWorks
edge switch 2/24 rack mount kit
installation instructions
Part Number: AA-RTDGB-TE/958-000285-001
Second Edition (January 2003)
These installation instructions provide the procedures used for
installing an HP StorageWorks Edge Switch 2/24 in an
appropriate rack.

Advertising

   Related Manuals for HP 316095-B21 - StorageWorks Edge Switch 2/24

   Summary of Contents for HP 316095-B21 - StorageWorks Edge Switch 2/24

  • Page 1

    hp StorageWorks edge switch 2/24 rack mount kit installation instructions Part Number: AA-RTDGB-TE/958-000285-001 Second Edition (January 2003) These installation instructions provide the procedures used for installing an HP StorageWorks Edge Switch 2/24 in an appropriate rack.

  • Page 2

    © Hewlett-Packard Company, 2003. All rights reserved. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

  • Page 3: Table Of Contents

    Contents About this Guide Intended Audience ............v Related Documentation .

  • Page 5: Intended Audience, Related Documentation

    About this Guide These installation instructions provide information to help you: • Install the HP StorageWorks™ Edge Switch 2/24 in an appropriate rack. • Contact technical support for additional assistance. Intended Audience This book is intended for use by technicians who are experienced with: •...

  • Page 6: Document Conventions

    About this Guide Document Conventions The conventions included in Table 1 apply. Table 1: Document Conventions Element Convention Cross-reference links Blue text: Figure 1 Key names, menu items, buttons, and Bold dialog box titles File names, application names, and text Italics emphasis User input, command names, system...

  • Page 7

    About this Guide Symbols on Equipment Any enclosed surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of injury from electrical shock hazards, do not open this enclosure.

  • Page 8: Rack Stability, Getting Help, Hp Technical Support

    About this Guide Rack Stability WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. •...

  • Page 9: Hp Authorized Reseller

    About this Guide HP Website The HP website has the latest information on this product, as well as the latest drivers. http://thenew.hp.com/country/us/eng/prodserv/storage.html. Access storage at: From this website, select the appropriate product or solution. HP Authorized Reseller For the name of your nearest HP Authorized Reseller: •...

  • Page 11: Edge Switch Rack Mount Kit Checklist, Mounting Hardware

    Installation Instructions Read these instructions to rack mount the HP StorageWorks Edge Switch 2/24 in the appropriate HP, or comparable, 19-inch Electronic Industries Association (EIA) rack: • HP 9000 series, 10000 series and 11000 series racks • HP rack system/e or 19-inch EIA rack Edge Switch Rack Mount Kit Checklist The hardware kit includes parts not required for the configuration described in these instructions.

  • Page 12: Brackets And Rails, Required Tools

    Installation Instructions Brackets and Rails Brackets and rails included in the kit are shown in Figure 1: 1 Two (2 ) fixed-length slide rails (one left and one right) 2 Two (2) Front brackets 3 Two (2) Rear brackets (long) 4 Two (2) Rear spacing bracket 5 Rear bracket (short) - not used in this configuration Figure 1: Brackets included in kit...

  • Page 13: Rack-mounting The Edge Switch 2/24, Mounting The Adjustable Brackets In The Rack

    Installation Instructions Rack-mounting the Edge Switch 2/24 Read this section to install the Edge Switch rack mount kit in the appropriate rack. Mounting the Adjustable Brackets in the Rack Use these steps to install the adjustable brackets on the rack. You will need a #2 Phillips screwdriver and eight 10x32 panhead screws to complete this procedure.

  • Page 14: Mounting The Slide Rails On The Sides Of The Switch

    Installation Instructions Mounting the Slide Rails on the Sides of the Switch Use these steps to install the slide rails on the sides of the switch as shown in Figure 2. You will need a torque driver with a T10 Torx bit (not supplied in the kit) and left and right slide rails to complete this procedure.

  • Page 15: Installing The Switch In The Cabinet

    Installation Instructions Installing the Switch in the Cabinet Use these steps to install the switch in the cabinet. You will need a #2 Phillips screwdriver and two rear spacing brackets to complete this procedure. 1. From the front side of the cabinet, slide the switch into the mounting brackets and along the rails until the rear of the switch is flush with the rear of the cabinet.

Comments to this Manuals

Symbols: 0
Latest comments: