HP 3100 v2 Series Command Reference Manual page 80

-------------------------------------------------------------------------------
Eth1/0/26
Eth1/0/32
# Display detailed information about the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 2, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 2
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation2
Aggregation Mode: Static
Loadsharing Type: NonS
Port
--------------------------------------------------------------------------------
Eth1/0/21
Eth1/0/22
Eth1/0/23
Table 19 Command output
Field
Loadsharing Type
Port Status
Flags
Aggregation Interface
Aggregation Mode
System ID
Local
Port
Status
Priority
32 32768
26 32768
Status Priority Oper-Key
U 32768
U 32768
U 63
Description
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Port state: Selected or Unselected.
LACP state flags:
•
A—LACP is enabled.
•
B—Indicates the LACP short timeout.
•
C—The sending system detects that the link is aggregatable.
•
D—The sending system detects that the link is synchronized.
•
E—The sending system detects that the incoming frames are collected.
•
F—The sending system detects that the outgoing frames are distributed.
•
G—The sending system receives frames in the default state.
•
H—The sending system receives frames in the expired state.
Name of the aggregate interface.
Mode of the aggregation group:
•
Static for static aggregation.
•
Dynamic for dynamic aggregation.
Local system ID, comprising the system LACP priority and the system MAC
address.
Information about the local end.
Port type and number.
Port state: selected or unselected.
Port aggregation priority.
73
2 0x8000, 000f-e267-57ad {ACDEF}
2 0x8000, 000f-e267-57ad {ACDEF}
1
1
1