Stp Enable - HP 3100 v2 Series Command Reference Manual

BPDU guard function is disabled, the port functions as a non-edge port, even if you configure it as an
edge port.
You cannot configure edge port settings and loop guard on a port at the same time.
Related commands: stp loop-protection.
Examples
# Configure Ethernet 1/0/1 as an edge port.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] stp edged-port enable

stp enable

Syntax
In system view:
stp [ vlan vlan-list ] enable
undo stp [ vlan vlan-list ] enable
In Ethernet interface, Layer 2 aggregate interface, or port group view:
stp enable
undo stp enable
View
System view, Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-list: Enables or disables the spanning tree feature for a VLAN list, which is specified in the
format of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>, where the vlan-id argument represents the VLAN
ID, in the range of 1 to 4094, and &<1-10> indicates that you can specify up to 10 VLAN IDs or VLAN
ID ranges. If you do not specify the vlan vlan-list option, the command enables or disables the
spanning tree feature globally rather than for any VLAN.
Description
Use stp enable to enable the spanning tree feature globally.
Use undo stp enable to disable the spanning tree feature.
By default, the spanning tree feature is disabled globally, enabled on all VLANs, and enabled on all
ports.
Configured in system view, the setting takes effect globally.
Configured in Ethernet interface view, the setting takes effect only on the interface.
Configured in port group view, the setting takes effect on all ports in the port group.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate
interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port
leaves the aggregation group.
When you enable the spanning tree feature, the device operates in STP, RSTP, MSTP, or PVST
mode, depending on the spanning tree mode setting.
112