Display Stp Root - HP 3100 v2 Series Command Reference Manual

[Sysname] stp mode pvst
[Sysname] display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 28 Command output
Field
Format selector
Region name
Revision level
Mode

display stp root

Syntax
display stp root [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display stp root to display the root bridge information of all MSTIs.
:0
:hello
:0
Mode Vlans Mapped
default 3 to 4094
static 1
dynamic 2
Description
Format selector defined by the spanning tree protocol. The default value is
0 and the selector cannot be configured.
MST region name.
Revision level of the MST region, which can be configured by using the
revision-level command and defaults to 0.
MSTI mode:
•
Default—The default instance MSTI 0. In PVST mode, the spanning
tree feature is disabled.
•
Static—The static MSTI.
•
Dynamic—The dynamically assigned MSTI, which only exists in
PVST mode.
101