Storm-Constrain Enable Trap; Storm-Constrain Interval - HP 3100 v2 Series Command Reference Manual

Description
Use storm-constrain enable log to enable an Ethernet interface to log storm control threshold
events. Logged events include traffic exceeding the upper threshold and traffic falling below the
lower threshold from the upper threshold.
Use undo storm-constrain enable log to disable log sending.
By default, a storm control-enabled port sends log messages when monitored traffic exceeds the
upper threshold or falls below the lower threshold from the upper threshold.
Examples
# Disable Ethernet 1/0/1 from sending out log messages upon detecting storm control threshold
events.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo storm-constrain enable log

storm-constrain enable trap

Syntax
storm-constrain enable trap
undo storm-constrain enable trap
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use storm-constrain enable trap to enable an Ethernet interface to send storm control threshold
event traps. Triggering events include traffic exceeding the upper threshold and traffic falling below
the lower threshold from the upper threshold.
Use undo storm-constrain enable trap to disable trap message sending.
By default, a storm control-enabled interface sends traps when monitored traffic exceeds the upper
threshold or falls below the lower threshold from the upper threshold.
Examples
# Disable Ethernet 1/0/1 from sending out storm control threshold event traps.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo storm-constrain enable trap

storm-constrain interval

Syntax
storm-constrain interval seconds
undo storm-constrain interval
35