HP 3100 v2 Series Command Reference Manual page 181

View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Displays the GVRP statistics of one or multiple Ethernet ports.
You can provide up to 10 Ethernet port lists, specified in the following ways:
•
As an individual port in the form of interface-type interface-number
•
As a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end-port number specified by interface-number2 must be greater
than the start-port number specified by interface-number1
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display gvrp statistics to display the GVRP statistics of the specified trunk ports. If no ports are
specified, this command displays the GVRP statistics for all trunk ports.
Examples
# Display GVRP statistics for trunk port Ethernet 1/0/1.
<Sysname> display gvrp statistics interface ethernet 1/0/1
GVRP statistics on port Ethernet1/0/1
Table 41 Command output
Field
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
: Enabled
: YES
: 0
: 0000-0000-0000
: Normal
Description
Indicates whether GVRP is enabled or disabled.
Indicates whether GVRP is running.
Indicates the number of GVRP registration failures.
Indicates the source MAC address in the last GVRP PDU.
Indicates the GVRP registration mode (fixed, forbidden, or
normal) on the port.
174