Lldp Tlv-Enable - HP 3100 v2 Series Command Reference Manual

lldp tlv-enable

Syntax
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } |
dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all |
capability | inventory | location-id { civic-address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-number } | network-policy | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description
| system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all |
link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id | network-policy | power-over-ethernet } }
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
all: Advertises all TLVs of the specified type.
•
Enables the interface to advertise the following TLVs:
All basic LLDP TLVs if the all keyword is specified for basic-tlv.
All IEEE 802.1 organizationally specific LLDP TLVs if the all keyword is specified for
dot1-tlv.
All IEEE 802.3 organizationally specific LLDP TLVs it the all keyword is specified for
dot3-tlv.
•
Enables the interface to advertise all LLDP-MED TLVs except location identification TLVs if the
all keyword is specified for med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument
specifies the ID of the VLAN to be advertised, in the range of 1 to 4094. By default, the vlan-id
argument is the least VLAN ID on the port.
vlan-name [ vlan-id ]: Advertises VLAN name TLVs. The vlan-id argument specifies the ID of the
VLAN to be advertised in the range of 1 to 4094. By default, the vlan-id argument is the least VLAN
ID on the port.
dot3-tlv: Advertises IEEE 802.3 organizationally specific LLDP TLVs.
link-aggregation: Advertises link aggregation TLVs.
mac-physic: Advertises MAC/PHY configuration/status TLVs.
max-frame-size: Advertises maximum frame size TLVs.
power: Advertises power via MDI TLVs and power stateful control TLVs.
211