Mrp Timer Periodic; Mvrp Global Enable - HP 3100 v2 Series Command Reference Manual

To avoid the case that the LeaveAll timer of a fixed participant always first expires, the switch
randomly changes the LeaveAll timer within a certain range when the MRP participant restarts its
LeaveAll timer.
Related commands: display mvrp running-status and mrp timer leave.
Examples
# Set the LeaveAll timer to 1500 centiseconds. (Suppose the Leave timer is restored to the default)
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer leaveall 1500

mrp timer periodic

Syntax
mrp timer periodic timer-value
undo mrp timer periodic
Default
The Periodic timer is 100 centiseconds.
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Periodic timer (in centiseconds), which can be 0 or 100.
Description
Use mrp timer periodic to set the Periodic timer.
Use undo mrp timer periodic to restore the default.
By default, the Periodic timer is 100 centiseconds.
Setting the Periodic timer to 0 disables periodic transmission of MRP messages. Setting the Periodic
timer to 100 enables periodic transmission of MRP messages.
Related commands: display mvrp running-status.
Examples
# Set the Periodic timer to 0 centiseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer periodic 0

mvrp global enable

Syntax
mvrp global enable
undo mvrp global enable
221