Display Stp Abnormal-Port - HP 3100 v2 Series Command Reference Manual

Field
BPDU Sent
BPDU Received
MSTI RegRoot/IRPC
MSTI RootPortId
MSTI Root Type
Master Bridge
Cost to Master
TC received
Protocol Status
Protocol Std.
Version
Bridge-Prio.
Max age(s)
Forward delay(s)
Hello time(s)
Max hops

display stp abnormal-port

Syntax
display stp abnormal-port [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
•
MsgAge—Message Age timer.
•
RemHop—Remaining hops.
Statistics on sent BPDUs.
Statistics on received BPDUs.
MSTI regional root/internal path cost.
MSTI root port ID.
MSTI root type, which can be primary root or secondary root.
MSTI root bridge ID.
Path cost from the MSTI to the master bridge.
Number of received TC BPDUs.
Spanning tree protocol status.
Spanning tree protocol standard.
Spanning tree protocol version.
In MSTP mode, this field indicates the device's priority in the CIST. In PVST
mode, this field indicates the device's priority in VLAN 1.
Aging timer (in seconds) for BPDUs. In PVST mode, this field is the
configuration in VLAN 1.
Port state transition delay (in seconds). In PVST mode, this field is the
configuration in VLAN 1.
Interval (in seconds) for the root bridge to send BPDUs. In PVST mode, this
field is the configuration in VLAN 1.
Maximum hops in the MSTI.
93