Qinq Enable Downlink (Available Only On The Hpe 3100 V2 Ei) - HP 3100 v2 Series Command Reference Manual

Parameters
None
Description
Use qinq enable to enable basic QinQ on the Ethernet ports.
Use undo qinq enable to disable basic QinQ on the Ethernet ports.
By default, basic QinQ is disabled on Ethernet ports.
A basic QinQ-enabled port tags received frames with its PVID tag.
Configured in Layer 2 Ethernet interface view, the command takes effect on the port only. Configured
in Layer 2 aggregate interface view, the command takes effect on the Layer 2 aggregate interface
and all the member ports in the aggregation group. Configured in port group view, the command
takes effect on all ports in the port group.
Examples
# Enable basic QinQ on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] qinq enable
# Enable basic QinQ on all ports in port group 1.
<Sysname> system-view
[Sysname] port-group manual 1
[Sysname-port-group-manual-1] group-member ethernet 1/0/1 to ethernet 1/0/6
[Sysname-port-group-manual-1] qinq enable

qinq enable downlink (available only on the HPE 3100 v2 EI)

Syntax
qinq enable downlink
undo qinq enable
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use qinq enable downlink to enable selective QinQ on an Ethernet port or a group of Ethernet
ports.
Use undo qinq enable to disable selective QinQ on an Ethernet port or a group of Ethernet ports.
By default, selective QinQ is disabled on Ethernet ports.
Configured in Layer 2 Ethernet interface view, the command takes effect only on the interface.
Configured in port group view, the command takes effect on all ports in the group.
Examples
# Enable selective QinQ on port Ethernet 1/0/1.
<Sysname> system-view
182