Mrp Timer Join; Mrp Timer Leave - HP 3100 v2 Series Command Reference Manual

Operations of deleting VLAN:
Operations of adding VLAN to Trunk:
Operations of deleting VLAN from Trunk:
Table 51 Command output
Field
Operations of adding VLAN to Trunk
Operations of deleting VLAN from Trunk

mrp timer join

Syntax
mrp timer join timer-value
undo mrp timer join
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Join timer value (in centiseconds). The Join timer must be less than half the Leave timer,
and must be a multiple of 20.
Description
Use mrp timer join to set the Join timer.
Use undo mrp timer join to restore the default.
By default, the Join timer is 20 centiseconds.
You will fail to restore the default Join timer if the default Join timer is not less than half the Leave
timer.
Related commands: display mvrp running-status and mrp timer leave.
Examples
# Set the Join timer to 40 centiseconds. (Suppose the Leave timer is 100 centiseconds)
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer join 40

mrp timer leave

Syntax
mrp timer leave timer-value
undo mrp timer leave
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
none
2-100
none
Description
Operations of adding VLANs to trunk ports
Operations of removing VLAN from trunk ports
219