Lldp Compliance Cdp (Available Only On The Hpe 3100 V2 Ei); Lldp Enable - HP 3100 v2 Series Command Reference Manual

[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lldp compliance admin-status cdp txrx

lldp compliance cdp (available only on the HPE 3100 v2 EI)

Syntax
lldp compliance cdp
undo lldp compliance cdp
View
System view
Default level
2: System level
Parameters
None
Description
Use lldp compliance cdp to enable global CDP compatibility.
Use undo lldp compliance cdp to restore the default.
By default, CDP compatibility is globally disabled.
The maximum TTL allowed by CDP is 255 seconds. To make CDP-compatible LLDP work correctly
with Cisco IP phones, the TTL configuration must be no more than 255 seconds. The TTL
configuration is the product of the TTL multiplier and the LLDP frame transmission interval.
Related commands: lldp hold-multiplier and lldp timer tx-interval.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp

lldp enable

Syntax
lldp enable
undo lldp enable
View
System view, Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use lldp enable to enable LLDP.
Use undo lldp enable to disable LLDP.
204