Port-based VLAN configuration commands
display port
Syntax
display port { hybrid | trunk } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
hybrid: Displays hybrid ports.
trunk: Displays trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display port to display information about the hybrid or trunk ports on the device, including the
port names, PVIDs, and allowed VLAN IDs.
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface
Eth1/0/4
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface
Eth1/0/8
Table 33 Command output
Field
Interface
PVID
VLAN passing
Tagged
PVID
VLAN passing
100
Tagged:
1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
PVID
VLAN passing
2
1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Description
Port name
PVID of the port
VLANs for which the port allows packets to pass through
VLANs for which the port sends packets without removing VLAN tags
145