Voice Vlan Enable; Voice Vlan Mac-Address - HP 3100 v2 Series Command Reference Manual

Set the voice VLAN aging timer only in automatic voice VLAN assignment mode.
Related commands: display voice vlan state.
Examples
# Configure the voice VLAN aging timer as 100 minutes.
<Sysname> system-view
[Sysname] voice vlan aging 100

voice vlan enable

Syntax
voice vlan vlan-id enable
undo voice vlan [ vlan-id ] enable
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
vlan-id: Specifies a VLAN ID, in the range of 2 to 4096.
Description
Use voice vlan enable to enable the voice VLAN feature and configure a VLAN as the voice VLAN
for a port.
Use undo voice vlan enable to disable the voice VLAN feature on a port.
By default, the voice VLAN feature is disabled on ports.
Use this command only on a hybrid or trunk port operating in automatic voice VLAN assignment
mode.
Examples
# Enable the voice VLAN feature on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] voice vlan 2 enable

voice vlan mac-address

Syntax
voice vlan mac-address mac-address mask oui-mask [ description text ]
undo voice vlan mac-address oui
View
System view
Default level
2: System level
165