Preprovisioning commands
display provision failed-config
Use
display provision failed-config
failure records.
Syntax
display provision failed-config
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
A preprovisioned command cannot be applied if it conflicts with the running configuration.
Use this command to verify the application result of preprovisioned commands except for the
following commands:
•
duplex
•
speed
•
sflow
To
verify
current-configuration
command might display incorrect application results for the listed commands.
Examples
# Display preprovisioned-commands application failure records.
<Sysname> display provision failed-config
Configuration applied at: Sat Jun 14 06:06:00 2014
Slot information: slot 1
Commands that failed to be applied:
#
interface HundredGigE1/0/1
port access vlan 2
#
Related commands
provision
reset provision failed-config
provision
Use
provision
Use
undo provision
the
application
result
command.
to enable preprovisioning.
to disable preprovisioning.
to display preprovisioned-commands application
of
the
listed
commands,
The
display
197
use
the
provision
failed-config
display