Reset Garp Statistics - HP 3100 v2 Series Command Reference Manual

[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port link-type trunk
[Sysname-Ethernet1/0/1] gvrp registration fixed

reset garp statistics

Syntax
reset garp statistics [ interface interface-list ]
View
User view
Default level
2: System level
Parameters
interface interface-list: Clears the GARP statistics of one or multiple ports.
You can provide up to 10 port lists, specified in the following ways:
•
As an individual port in the form of interface-type interface-number
•
As a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end-port number specified by interface-number2 must be greater
than the start port number specified by interface-number1.
Description
Use reset garp statistics to clear the GARP statistics on the specified ports. If no ports are specified,
this command clears the GARP statistics on all ports.
The cleared statistics include the statistics about GVRP PDUs sent, received, and dropped.
Related commands: display garp statistics.
Examples
# Clear the GARP statistics on all ports.
<Sysname> reset garp statistics
180