Display Lldp Tlv-Config - HP 3600 v2 Series Command Reference Manual

display lldp tlv-config

Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of interface Ethernet 1/0/1.
<Sysname> display lldp tlv-config interface ethernet 1/0/1
LLDP tlv-config of port 1[Ethernet1/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
IEEE 802.1 extend TLV:
Port VLAN ID TLV
Port And Protocol VLAN ID TLV
VLAN Name TLV
IEEE 802.3 extend TLV:
MAC-Physic TLV
Power via MDI TLV
Link Aggregation TLV
Maximum Frame Size TLV
STATUS DEFAULT
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
248