Display Link-Aggregation Member-Port - HP 3100 v2 Series Command Reference Manual

Description
Use display link-aggregation load-sharing mode to display global link-aggregation load sharing
criteria.
Examples
# Display the global link-aggregation load sharing criteria.
<Sysname>display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: source-mac address
Layer 3 traffic: destination-ip address, source-ip address
Table 16 Command output
Field
Link-Aggregation Load-Sharing
Mode
Layer 2 traffic: source-mac
address
Layer 3 traffic: destination-ip
address, source-ip address

display link-aggregation member-port

Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number
indicates the port type and port number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Description
Global link-aggregation load sharing criteria.
Default link-aggregation load sharing criteria for Layer 2 traffic. In this
sample output, the criteria are the source MAC address of packets.
Default link-aggregation load sharing criteria for Layer 3 traffic. In this
sample output, the criteria are the source and destination IP addresses
of packets.
68